| The TidyTent can be installed in a wide variety of locations against walls and fences. The outer edge of the rear panel now has 7 fixing points for added rigidty and strength. You do not need to use all 7, however, it is recommended for best results. Simply connect the main fibreglass rods and slide through two sleeves in the nylon/polyester fabric, inserting the ends into the “feet” in the base panel. Next place the 5 smaller rods into the eyelets in the front and rear panels to stretch the 2 arcs apart. Finally drill up to 7 holes and screw the back panel secure. A number of weight bags are included as standard. These can be filled with sand or pebbles and placed along the edges of the ground sheet inside to prevent the wind from blowing underneath. The recommended installation, however is to carefully place a number of old paving slabs or wooden blocks over the groundsheet to provide a more permanent and robust solution. |
TidyTent ... the versatile storage solution
